Author Archives: blogger

How To Get Pregnant Baby Making Sex

Introduction
Here we get to the nitty-gritty: How do you really get pregnant? You have sex, of course. Yes, you need to try and predict your ovulation through charting your cycle, but if you and your partner dont get busy, then your goal cannot be realized.

Obviously, it only takes one time to get pregnant. In order to maximize your odds of getting pregnant, though, it is best to have intercourse at least a couple of times during your fertile time. After having read this book, you are aware of the infertile times of your cycle.

It is a good idea, however, to be sexually active throughout your cycle. Why?
1)Frequency of ejaculation can help improve the motility of sperm. It is not recommended that your partner refrain from ejaculation for more than a week.
2)Trying to get pregnant can be stressful for both partners. If you are only intimate in order to get pregnant, then you are putting undue pressure on those few times that you engage in intercourse. Your partner may have a hard time a) getting or keeping an erection, or b) ejaculating. To avoid these situations, have sex throughout your cycle. Moreover, if you are having trouble predicting ovulation, this strategy will maximize your chance for success.

How To

Yes, I realize that you know how to have sex. Try and think of this as baby making sex, however. It should be a bit different from your normal activities. Of course, just by having sex, you can get pregnant, but if you follow some of these tricks of the trade, then you will enhance your chances.

Many believe that getting pregnant should be fun and spontaneous. Yes, you can have fun, but spontaneity should be reserved for your infertile times. making requires planning to increase your chances of getting pregnant. After all, if you wanted to be spontaneous, you wouldnt be reading this book.

Sperm Count

Sperm count is a key factor in conception. Total count, concentration, motility, abnormalities, etc. are all components of semen analysis (S/A). If your partner has been tested, then you are a step ahead of most couples. If your partner has not been tested, then it is best to assume a normal sperm count in the beginning of your trying to get pregnant journey.

Normal Sperm Count

It is necessary for your partner to build up his sperm count before starting the baby making process. A three day period of abstinence goes a long way in ensuring that there will be a sufficient concentration and number of sperm to get the job done. Remember that abstinence excludes all forms of ejaculation: oral sex, masturbation, intercourse, etc.

After your partner suffers through this three day period, have intercourse on a daily basis. Make sure that you are timing sex at least 24 hours apart, though. Your partner needs this time to refuel. This means that you do need to schedule your times of intimacy. Pick a time of day that you are both free and unencumbered.

Mona and her husband, Mike, decide that 10pm is the best time to engage in baby making sex. At this time, they are usually settling in to watch the news. They are relaxed and have finished all of the days chores and activities. Moreover, they have a sufficient amount of time and do not need to rush.

Mike and Monas Timetable:
1)They have intercourse on Monday night.
2)Mike then abstains until 10pm on Thursday night.
3)The couple then engages in baby making sex every night at 10pm from Thursday through Sunday.
4)Monas chart shows probable ovulation occurring on Saturday.

Low Sperm Count

For a low sperm count, you should be engaging in baby making sex every other day (48 hours apart) because your partner needs more time to refuel then a man with a normal sperm count needs. Abstaining from ejaculation for at least three days before you start your baby making schedule is still crucial.

Jeff has a low sperm count. He and his partner, Cara, decide that since they usually go to sleep at 11:30pm, they will start their baby making encounters at 10:30pm.

Jeff and Caras Timetable:
1)On Monday, Jeff masturbates. He then abstains until Thursday night (observing the three day rule).
2)The couple has intercourse Thursday, Saturday, Monday, and Wednesday nights at about 10:30pm.
3)Caras chart shows probable ovulation occurring on Tuesday.

Its not Working!!

I had recommended that in the absence of any medical testing, you should assume that your partner has a normal sperm count. After a few non-successful cycles, however, a change can be made. You may decide to go with the low sperm count schedule of intercourse which is every 48 hours. You might, however, want to try a more moderate schedule of every 36 hours. The latter might be a little more tricky, schedule wise. As a couple, you will need to find two times during the day that are free and unencumbered. Obviously, this is a much easier scenario for a childless couple.

Lucy and Rob have been trying to get pregnant for four cycles. Rob has not had an S/A done, but they have assumed his count was normal, thus having intercourse daily. The couple decides that they would like to try the 36-hour method. Lucy needs to get up for work at 7am while Rob doesnt need to arise until 8am. The couple decides to set the alarm for 6:15am and engage in baby making sex. They know that they will also have to have sex at around 7pm, about 36 hours later. This is also a good time for them because it is after dinner.

Lucy and Robs Timetable:
1)They engage in intercourse on Saturday morning.
2)Rob abstains until Tuesday morning (observing three day rule).
3)The couple then has sex at these times: 6:15am Tuesday, 7pm Wednesday, 6:15am Friday, and 7pm Saturday.
4)Lucys chart shows probable ovulation occurring on Friday.

NOTE: If you are having intercourse daily, then it is very important to leave 24 hours in between sessions, allowing time for your partner to rebuild his sperm count. If you are following a 36-hour or 48-hour schedule then being off by a couple of hours will not be as much of a problem.

Pattern

Practice makes perfect. It is much easier to plan your intercourse timing and frequency when you have charted at least two cycles (three or more is better) because then you will have an idea of your personal pattern. You will want to know at what point in your cycle you usually ovulate. This does not mean that you have to state: I ovulate on cycle day X. Although this is ideal, it is not realistic that you will ovulate on the exact same cycle day each month. It is more probably that you will be able to state a range: I will probably ovulate sometime between cycle day X and Z.

It is ideal to engage in at least two baby making encounters before your ovulation date, to try and ensure fertilization.

O Day is the Best Day???

Many women think that if they have intercourse on ovulation day, then they will have done their best. This is a misconception for three reasons:
1)Many women notice that their peak day (last day of fertile quality cervical fluid (CF)) actually occurs one day before ovulation. Since fertile quality CF is the best medium of transportation for the sperm, it would stand to reason that your peak day is the best day to engage in baby making sex.
2)Many women begin to dry up on ovulation day. Sticky CF or no CF will be a major hindrance to the sperms motility.
3)It is best for the sperm to be in the fallopian tubes before the egg is released. It may take hours for the sperm to travel to the fallopian tubes. Unless you know the exact hour that you are going to ovulate, having intercourse on ovulation day can be a hit or miss prospect.

So if the peak day is the best day, then what? Obviously, if you are having sex daily, then hitting the peak day is no problem. If you are having sex every other day, it can be tricky. Try your best to include the peak day, but dont fret if its not possible. Remember that sperm can live for five to six days in fertile quality fluid. If you have two days of eggwhite CF, and you have sex on one of them, then you are golden. Even if you miss your eggwhite day, but hit your creamy CF day, then you will still have a great shot.

Positions

Many women want to know what the best position is for baby making sex. There are two that I favor, missionary and rear entry. The one position that you definitely want to avoid is woman-on-top. The problem with this position is simply gravity. When your partner ejaculates while you are on top, there is an increased chance that the sperm will leak out. Missionary is usually the favored position, but rear entry has a distinct advantage of depositing the sperm closer to your cervix.

NOTE: Rear entry can be more of a disadvantage if your partner ejaculates too deeply, creating a pool of sperm behind your cervix. To minimize this risk, your partner should pullback slightly just before ejaculating.

To Recline is Divine

After intercourse, it is preferable that you lie down on your back for at least 15 minutes with your hips elevated. This practice will allow the sperm time to begin their journey to the fallopian tubes without having to fight gravity. To elevate your hips, put a pillow underneath your bottom. Have your partner turn on the TV for you or better yet use the time to talk about your day with your significant other. 15-30 minutes is all you need to allow the sperm to get a head start.

Have a Tilted Uterus?

20% of women have a tilted uterus. This means that the uterus tips either forwards or backwards (anteflexed or retroflexed). Having a tilted uterus does not decrease your chances of getting pregnant. It is actually considered to be akin to being left-handed. You can improve your chances by engaging in rear entry intercourse, however. Also, it is recommended that instead of lying on your back for 15-30 minutes after intercourse, you lie on your stomach instead. Put a pillow underneath the upper part of your thigh for elevation.

Things to Avoid
1)Saliva: it can kill sperm. It is best not to engage in oral sex before you have intercourse.
2)Some commercial lubricants: many of them will decrease your chances of getting pregnant. If you must use lubrication, real eggwhites are ideal. Also, a new product, Pre~Seed Intimate Moisturizer, has been receiving rave reviews from women, so it may be worth a try.
3)Woman-on-top position: it should be avoided at time of ejaculation.
4)Getting up immediately after intercourse: if possible, give the sperm some time to travel by lying down afterwards.

Happy Baby Making!

Visit the Baby Making 101 official website today: Your How to Get Pregnant
Eguide

Weather Leads To Mines Transportation Interruption

Weather leads to mines transportation interruption
Three global miner Rio Tinto, BHP Billiton, CVRD today have been published their quarterly production report, which illustrated that affected by inclement weather in Australia, Brazil and other places , three miners of iron ore-quarter production chain fell.

Australian miner BHP Billiton iron ore production in January to March reached 37.94 million tons, a decline of 8 percent, an increase of 14 percent, the company announced that is mainly affected by the impact of hurricane activity in Australia due.

Equally Australian miner Rio Tinto is also affected. Rio Tinto in the first quarter iron ore production was 45.6 million tons, a decrease of 11%, an increase of 9%. Due to weather-related factors have led to the WA ports and mines, transportation interruption, a quarter of Rio Tinto iron ore shipments only a slight increase up to 54 million tons, compared to 2% last year.

Brazil’s CVRD iron ore production in January-March amounted to 70 million tons, a decrease of 15.6%, down 2.2 percent, the announcement that mainly due to seasonal factors, for the second quarter of Brazil’s main producing areas in the strength of the rainy season, have an impact on production.

Always confront unpredictable market situation changes, economic fluctuations are difficult to prevent, how to make their own economic crisis turned the corner, there is a survival skill in the various enterprises. Ju Xin gravel crusher in the economic crisis appears to be able to change in order to more secure through the difficulties of the economic crisis in a timely manner. China’s economy is still in its rising phase, the huge demand of economic development will continue to promote the supply and demand in the market has shown a steady and rapid growth, the price will remain the shock upstream, so part of the sand grinder users also actively to the international market for the supply of crusher to promote the import of crusher run high. China’s economic growth mode has its inherent adjustment requirements throughout the construction machinery industry will belong-term impact. Steel, municipalities and the dynamic impact of the present situation, the price of the Crusher is mainly due to the money effect, the new funds to increase the expectations of rising prices, the current steel market in the stock market trend is worsening this change will lead to the transformation of the steel trade mode of operation.

We provide Professional technology, excellent product quality and intimate after-sales service when you purchase Portable crusher, Hammer crusher, from our company.As a professional mining machinery exporter, we will win your trust with our delivery speed, Enterprises Credit and product quality.

Limousine Service Providers Offer More Than Just Transportation

One of the best ways for visitors to get a feel for the Texas Panhandle is to engage the services of people who have been residents of the area for a long time. “Limousine service” providers offer more than just transportation; they offer knowledge of all the sites to see around town and throughout the Tri State Area. Remember you want “Limousine service” with a touch of class.

When you are interested in visiting the Texas Panhandle, or making it your home, you really should take advantage of a guided tour with a “Limousine service” so that you will not miss out on some of the fascinating attractions, both well known and a bit more obscure. Local “Limousine service” will make sure you dont miss out on a thing.

“Limousine service” in the Texas Panhandle can help you see places like Palo Duro Canyon, which is the second largest canyon in the United States, bring visitors year round, but the original play “Texas” during the summer months brings them from around the world. “Limousine service” that will get you there on time every time can make the experience even more special.

“Limousine service” providers in the Texas Panhandle are proud to announce that Texas is a great place to live and the conservative values of the Panhandle make it even better for those who desire to live amongst people who share their concern for preserving traditional family values. When you are considering relocating to the Texas Panhandle enlisting the assistance of a “Limousine service” will allow you to see things you never even knew existed.

When it has to be perfect, hiring a “Limousine service” to get you there on time every time is just a natural part of making sure your special occasion has that even more special feel. There is just nothing like getting that red carpet treatment to make a good impression on business associates or that someone special for those occasions when you need to give your full attention to your guests. Chauffeured “Limousine service” provides the ambiance you are looking for.

“Limousine service” in Amarillo, Texas is available to anyone for any occasion, and providers offer the exceptional benefit of being your designated driver so that you know you will arrive home safely after and exciting night out on the town. When you hire “Limousine service” you will not have to worry that you may not be in shape to get behind the wheel of you vehicle after you have spent time in your favorite night spot. Just have some fun and leave the driving to us.

Luxury Tours Unlimited offers “Limousine service” for anyone that wants to make their time spent around the Texas Panhandle a memorable experience. When you book your “Limousine service” with us 30 days in advance you will receive a 5% discount with your deposit payment. http://www.luxurytoursunlimited.com

World Best Used 4×4 Trucks

Those who are having construction, farming, or landscaping business, always need trucks for heavy loading. If you will visit DynamicTrucksOnline.com, you will see a huge collection of trucks which is available at affordable prices. The collection includes most efficient Used 4×4 Trucks. These trucks are the best suitable for any rough use. It fulfills every requirement of buyers. Most of the customers prefer to buy this truck from this website.

If you will search on the internet for getting information about practical and real labor vehicles, you will definitely impressed with the truck industry. It regularly is splintering into more and more advanced fields. Earlier, there was a time, when all radically various jobs are performed by the only heavy duty diesel trucks. but nowadays, people will surely find customized or modified Used 4×4 Trucks fro different industries. While production of this truck, specialized flatbed is used. It helps to make hauling and other kinds of different structures to carry big load. Most of the leading automobile manufacturers offer a selection of generously designed and implement edition direct from the factory.

These Used 4×4 Trucks has two side mirrors for noticing other vehicles which are passing besides you. The material of its outer body is resistible in all season. Wheels of this truck have a capacity to drive smoothly on the rough roads. Inside the truck, you will see a huge space for accommodation of material. It has special space for accommodating passengers. These trucks used quality auto parts which make transportation process easy and comfortable. After going through different testes, it is proved that these trucks are more powerful than any other trucks. These trucks are available in various sizes such as 4×4 Pickup trucks, 4×4 Lifted trucks and also 4×4 big lifted trucks. Every type of truck has many benefits like high engine efficiencies, equal transmission on all the wheels and most importantly wheel balancing. All these features of Used 4×4 Trucks help to enhance the speed of the truck and performance of the trucks. These trucks can efficiently carry transportation of larger goods. Even the trucks are overloaded; there are no chances of accident.

Today, there is no shortage of Used 4×4 Trucks. The whole range of this truck is now available with most colorful designs and advanced functions. These trucks are multifunctional. Before designing the model of this truck, experts considered all essential requirements of the customers. If you will visit any truck parade or truck show, then you will get the detail information about these trucks. People specially visit this place to get more information regarding these trucks.

Used 4×4 Trucks provides a latest technology for use. It has more distinct and shapely outer body. This truck is the way to understand why trucks can be such a fascinating hobby to explore. The technology of this truck is the great example of latest trend. From the day of launching, the number of customers who wants to buy these trucks is increasing rapidly.

Tahr Hunting In New Zealand

About New Zealand Tahr

The Himalayan Tahr, originally from the areas around Tibet, were introduced to the Southern Alps of the South Island of New Zealand around 1904 to 1906. Initially considered a pest, the New Zealand government controlled the Tahr herds with government sharpshooters and aircraft. Over the last twenty years, the Tahr hunting status has changed from being unwanted pests to a manageable, renewable and valuable resource to many local and overseas trophy hunters.

The Tahr is a majestic animal found on hillside rocky outcroppings with their long lion like mane blowing in the wind. This is truly a majestic sight. When put to chase, the Tahr hunter will be in awe of their climbing abilities in the steep New Zealand Alpines they call home.

The Himalayan Tahr is close relative to the free range mountain goat. A Tahr has relatively short legs and small head with large eyes and small pointed ears. Their hooves have a flexible, rubbery core that allows them to grip smooth rocks, while a hard sharp rim can lodge into small footholds. Tahr inhabits steep broken mountainous landscapes ranging from 3000 to 8000 above sea level. Males are much larger and have different coloration and horn structure than the females. Adult Himalayan Tahr can weigh from 300 to 400 pounds and stand 2 to 3 feet tall. The nannies (females) only weigh 45-55 pounds. This is one of the largest pair ratio differences between any mammals in the world. Himalayan Tahr are herbivores, subsisting on tall alpine tussock grasses and shrubs. Himalayan Tahr can be found in herds from 2-25 animals and can live up to 14 years old in the wild.

What makes a Trophy Bull Tahr?

A Bull Tahr has horn bases of 8-9 and a sharp round curled horn of 10 to 14 inches. A Tahr Hunter will judge a good trophy male by its long mane as well as its horns although record book scoring only uses a combination of the base horn diameter and length of both horns. Most Tahr hunting guides will look for horns over 11 inches in length. Tahr horns of 12.5 to 13.5 inches are considered an above trophy average and horns over 14 are exceptional. There have been a few New Zealand Tahr taken with horns over 15 and these usually fall into the SCI Top 10 Record Category.

When should I plan my Tahr Hunting Trip?

Like Chamois hunting, Tahr Hunting can be done year. The ideal time to hunt Tahr is during New Zealands late fall and winter. By Tahr hunting in winter, the Tahr will have their winter coats and manes. A Tahrs mane can grow 5-8 in length from February to early June and turn darker in color. Late May, June, July and August are ideal months to hunt Tahr and chamois. The Tahr rut runs late May thru July which usually correlates with the first snow of the season. The rut is an excellent time for Bow hunting. Tahr can be hunted in conjunction with the red stag roar or rut in March and April but the hunter will have to work harder to find a Tahr with a long mane at that time of year. The coats will also be lighter in color before winter sets in.

What is the best way to hunt New Zealand Tahr?

Most Tahr hunting mountains are accessible by two-tracks or fire trails up to the tops of the mountains. Hunters usually glass the mountainsides in the early mornings and again in the late afternoon and then hunt down the mountains and are greeted by the outfitters vehicle below. Tahr hunting terrain can range from 3 tall tussock grass to rock and shale hillsides. In most cases, the physical demand for this type of hunt is a lot less than that of Mountain Goat or Sheep hunting. You should allow at least 2 days for a rifle Tahr hunt (in good weather) and 3-4 days with a bow for a good specimen. If you are strictly record book trophy hunting, you can easily double that time period.

What about Tahr hunting by Helicopter?

Helicopter assisted Tahr hunting enables hunters to access the more remote mountainous areas where there are excellent trophy animals. It also gives greater assurance of success if the hunter has a limited time in New Zealand to hunt. Helicopter assisted hunting can be an exciting alternative with spectacular flights, and the opportunity to take an exceptional trophy. It is important to note that the helicopter is only used as a mode of transportation and animal recovery. Hunters are not allowed to shoot, drive or herd animals from the air. The Tahr hunters spot their trophy from the helicopter and are taken to an area when they can pursue their spot and stalk by foot. This type of hunting does contain a element of caution as you will be exiting a moving aircraft on an unknown mountain ledge.

What do I need to take with me on a Tahr hunt?

Most Tahr hunting is done in the higher elevations of the New Zealand Alpines. Some of these mountains are covered with 2-3 tall clumps of Tussock Grass and some are rocky outcroppings of rocks and broken shale. Starting in June, these same mountains could also have snow on them. Make sure you have good boots that are broken in. Since you may be hunting in snow, you will want your boots insulated and waterproof. If you are hunting on a mountainside of tussock grass, wear a good pair of gators. The gators will keep the snow or morning dew from getting your hunting pants wet and cold. Premium optics is essential. Buy the best glass you can afford. I recommend a binocular harness as it will come in handy when traversing shale and lose rocks. This will keep your binoculars from getting bounced around or worse, banged on a rock. Most Tahr rifle shots will be in the 150 to 250 yard range. A good range finder will come in handy for both rifle and bow hunters. At 300 plus pounds, the Tahr is a good size trophy animal. I would recommend 7mm or larger and 164 grain or larger expandable bullet. A good 3,000 fps .30 caliber with an 180 grain expandable bullet is ideal for Tahr. Your rifle should be equipped with a good quality scope in the 3×9 or 2.5×10 magnification. I would also recommend a good backpack that is capable of carrying your rifle or bow. This will keep your hands free when moving across the mountainsides. If you are bow hunting, a good bow hunting guide can usually get you within 40-50 yards of your Tahr during the rut. Taking a trophy Tahr is quite an accomplishment with a bow. Allow yourself extra hunting days. Your biggest challenges in Tahr hunting are the nannies giving their warning whistle as you stalk your Bull Tahr.

How should I have my Tahr taxidermy mounted?

I recommend that all Tahr hunters, especially first time Tahr hunters, really think about how you want your bull Tahr mounted. A shoulder mount is the most economical taxidermy mount but it really doesnt give justice to the long hair on the Tahrs mane. Here is a tip for your first (or only) Tahr Hunting trip.

Have the guide cape it out for a full body mount. It will be 4-months before you get the cape back to the USA and probably several more months before your taxidermist will send it out for tanning. This will give you some extra time to decide (and save up) whether or not you want to do a shoulder mount or a full body mount. If your guide capes it out for a shoulder mount in the field, you are stuck with your choice. The full body bull Tahr mount is spectacular and will be a highlight to any hunters man cave or trophy room. You may also want to consider taking a Nanny Tahr. Some outfitters will let you harvest a Nanny for a few hundred dollars in conjunction of taking a bull Tahr at their standard trophy fee. A Bull & Nanny Tahr make a great pedestal mount.

Global Sporting Safaris, a hunting consultant company, offers the best opportunity for Tahr hunting in New Zealand. Whether you are a bow hunter, muzzleloader, crossbow hunter or rifle hunter, we have the locations, guides and experience to put you on the trophy Tahr hunt of a lifetime.